Perl - Revision history

joerg_rw: Undo revision 46000 by 114.79.28.10 (Talk) vandalism/spam

joerg_rw — Thu, 15 Dec 2011 06:28:50 GMT

Undo revision 46000 by 114.79.28.10 (Talk) vandalism/spam

← Older revision		Revision as of 06:28, 15 December 2011
Line 7:		Line 7:
	One caveat of perl development on the N900 is that there is a fuller Perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental Perl modules are missing form the normal Debian version of Perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 MB.		One caveat of perl development on the N900 is that there is a fuller Perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental Perl modules are missing form the normal Debian version of Perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 MB.

-	You will find it difficult to build Perl modules on the device if you do not add the necessary Perl tools, namely <code>perl</code> and <code>perl-modules</code>. Without these ~~[http://goo.gl/Dg36c youtube] [http://goo.gl/16GT5 idm]~~ key tools, many of the modules used to build Perl modules won't exist on the device and you won't be able to add software written in Perl. Here is an example of what is shipped with both the SDK and device environments;	+	You will find it difficult to build Perl modules on the device if you do not add the necessary Perl tools, namely <code>perl</code> and <code>perl-modules</code>. Without these key tools, many of the modules used to build Perl modules won't exist on the device and you won't be able to add software written in Perl. Here is an example of what is shipped with both the SDK and device environments;

	{\| class="wikitable"		{\| class="wikitable"

114.79.28.10: /* Fremantle */

114.79.28.10 — Thu, 15 Dec 2011 03:11:04 GMT

Fremantle

← Older revision		Revision as of 03:11, 15 December 2011
Line 7:		Line 7:
	One caveat of perl development on the N900 is that there is a fuller Perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental Perl modules are missing form the normal Debian version of Perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 MB.		One caveat of perl development on the N900 is that there is a fuller Perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental Perl modules are missing form the normal Debian version of Perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 MB.

-	You will find it difficult to build Perl modules on the device if you do not add the necessary Perl tools, namely <code>perl</code> and <code>perl-modules</code>. Without these key tools, many of the modules used to build Perl modules won't exist on the device and you won't be able to add software written in Perl. Here is an example of what is shipped with both the SDK and device environments;	+	You will find it difficult to build Perl modules on the device if you do not add the necessary Perl tools, namely <code>perl</code> and <code>perl-modules</code>. Without these [http://goo.gl/Dg36c youtube] [http://goo.gl/16GT5 idm] key tools, many of the modules used to build Perl modules won't exist on the device and you won't be able to add software written in Perl. Here is an example of what is shipped with both the SDK and device environments;

	{\| class="wikitable"		{\| class="wikitable"

amigadave: /* dh-make-perl at garage.maemo.org */ use ,


amigadave — Wed, 02 Mar 2011 11:02:55 GMT
dh-make-perl at garage.maemo.org:  use <source>, <code>

		
		
		
		
		
		
		← Older revision
		Revision as of 11:02, 2 March 2011
		
		Line 46:
Line 46:
 Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):  Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):
  
-  # Environment vars + <source lang="bash">
-  SBOX_REDIRECT_IGNORE=/usr/bin/perl + # Environment vars
-  export  SBOX_REDIRECT_IGNORE + SBOX_REDIRECT_IGNORE=/usr/bin/perl
-  unset PERL5LIB + export  SBOX_REDIRECT_IGNORE
-  export PATH=/usr/bin/dh7:/usr/bin:$PATH + unset PERL5LIB
-  export DISPLAY=:2 + export PATH=/usr/bin/dh7:/usr/bin:$PATH
-  export http_proxy=http://172.16.0.1:3128 + export DISPLAY=:2
-  export https_proxy=http://172.16.0.1:3128 + export http_proxy=http://172.16.0.1:3128
-  export ftp_proxy=http://172.16.0.1:3128 + export https_proxy=http://172.16.0.1:3128
-  export GIT_SSL_NO_VERIFY=1 + export ftp_proxy=http://172.16.0.1:3128
-  echo "127.0.0.1 localhost" > /etc/hosts + export GIT_SSL_NO_VERIFY=1
  + echo "127.0.0.1 localhost" > /etc/hosts
  + </source>
  
 Nasty script to substitute <code>/usr/bin/man</code> which breaks <code>dh_installdocs</code>  Nasty script to substitute <code>/usr/bin/man</code> which breaks <code>dh_installdocs</code>
  
-  #!/bin/bash + <source lang="bash">
-  n=$# + #!/bin/bash
  + n=$#
  + echo "$# $1 $2 $n"
  + while [ $n -ne 1 ]; do
   echo "$# $1 $2 $n"    echo "$# $1 $2 $n"
-  while [ $n -ne 1 ]; do  
-   echo "$# $1 $2 $n"  
-   p=$1  
-   shift  
-   n=$#  
-  done  
   p=$1    p=$1
-   echo $p +   shift
-  /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p +  n=$#
  + done
  + p=$1
  + echo $p
  + /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p
  + </source>
  
- Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl. + Some packages ported include ssleay and some others which are needed prerequisites for <code>dh-make-perl</code>.
  
 [[Category:Software]]  [[Category:Software]]
 [[Category:Development]]  [[Category:Development]]



amigadave: /* Fremantle */ add table caption
amigadave — Wed, 02 Mar 2011 11:00:43 GMT
Fremantle:  add table caption

		
		
		
		
		
		
		← Older revision
		Revision as of 11:00, 2 March 2011
		
		Line 10:
Line 10:
  
 {| class="wikitable"  {| class="wikitable"
  + |+ Installed Perl packages
  + |-
 ! In the SDK !! On device  ! In the SDK !! On device
 |-  |-




amigadave: wikify slightly
amigadave — Wed, 14 Jul 2010 13:18:35 GMT
wikify slightly

		
		
		
		
		
		
		← Older revision
		Revision as of 13:18, 14 July 2010
		
		Line 1:
Line 1:
- '''The Perl environment on the Maemo Platform''' + Because Maemo is based on Debian, and because perl is such a big part of the debian OS, Maemo contains a full-blown Perl platform. This page aims to document and describe this environment so developers can take advantage of it when programming on the Maemo platform.
  
- Because Maemo is based on debian, and because perl is such a big part of the debian OS, Maemo contains a full-blown Perl platform. This page aims to document and describe this environment so developers can take advantage of it when programming on the Maemo platform. + == Fremantle ==
  
  + The current version of perl shipped with the [[Nokia N900|N900]] is 5.8.3. 
  
- '''Fremantle''' + One caveat of perl development on the N900 is that there is a fuller Perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental Perl modules are missing form the normal Debian version of Perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 MB.
  
- The current version of perl shipped with the N900 is 5.8.3. + You will find it difficult to build Perl modules on the device if you do not add the necessary Perl tools, namely <code>perl</code> and <code>perl-modules</code>. Without these key tools, many of the modules used to build Perl modules won't exist on the device and you won't be able to add software written in Perl. Here is an example of what is shipped with both the SDK and device environments;
  
-  
- One caveat of perl development on the [[N900]] is that there is a fuller perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental perl modules are missing form the normal debian version of perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 Megs.  
-  
- You will find it difficult to build perl modules on the device if you do not add the necessary perl tools, namely perl and perl-modules. Without these key tools, many of the modules used to build perl modules won't exist on the device and you won't be able to add software written in perl. Here is an example of what is shipped with both the SDK and device environments;  
-  
- {| class="wikitable"  
- |  | '''In the SDK'''  
- | style="background:LightBlue" | '''On device'''  
- |}  
 {| class="wikitable"  {| class="wikitable"
- | | liblocale-gettext-perl   ''1.01-17osso2''<BR>   + ! In the SDK !! On device
- libtimedate-perl  ''1.1600-4osso''<BR> + |-
- perl ''5.8.3-3osso10''<BR> + | liblocale-gettext-perl   ''1.01-17osso2''<br/>  
- perl-base ''5.8.3-3osso10''<BR> + libtimedate-perl  ''1.1600-4osso''<br/>
- perl-modules ''5.8.3-3osso10''<BR> + perl ''5.8.3-3osso10''<br/>
- | style="background:LightBlue" | liblocale-gettext-perl   ''1.01-17osso2''<BR>   + perl-base ''5.8.3-3osso10''<br/>
  + perl-modules ''5.8.3-3osso10''<br/>
  + | liblocale-gettext-perl   ''1.01-17osso2''<br/>  
 perl-base ''5.8.3-3osso10''  perl-base ''5.8.3-3osso10''
 |}  |}
Line 32:
Line 26:
   deb http://repository.maemo.org fremantle/tools free non-free    deb http://repository.maemo.org fremantle/tools free non-free
  
  + If you wish to add Perl modules what I recommend is to bring in the necessary tools, namely the <code>perl</code> package and the <code>perl-modules</code> package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build Perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built Perl binaries for the N900. (There are later versions of Perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on Google.)
  
-   + Once you have added the SDK repositories to your <code>/etc/apt/sources.list</code>, simply run:
- If you wish to add perl modules what I recommend is to bring in the necessary tools, namely the perl package and the perl-modules package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built perl binaries for the N900. (There are later versions of perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on google.) +  apt-get update
-   +  apt-get install perl perl-modules
- Once you have added the SDK repositories to your /etc/apt/sources.list, simply run apt-get update and apt-get install perl perl-modules. + 
  
 Now you should be ready to start bringing other modules in.  Now you should be ready to start bringing other modules in.
Line 43:
Line 37:
  
 I have packaged one module so far, I hope to bring in many more perl modules. If you package something for the device, why not contribute your module to the maemo repos and/or ask me to pull it into the [http://gitorious.org/maemo-perl-packages/maemo-perl-packages/trees/master gitorious repo that] I have set up?  I have packaged one module so far, I hope to bring in many more perl modules. If you package something for the device, why not contribute your module to the maemo repos and/or ask me to pull it into the [http://gitorious.org/maemo-perl-packages/maemo-perl-packages/trees/master gitorious repo that] I have set up?
-  
- [[Category:Software]]  
  
 === dh-make-perl at garage.maemo.org ===  === dh-make-perl at garage.maemo.org ===
  
- Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among + Just ported <code>dh-make-perl</code> for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among
  
 Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):  Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):
Line 64:
Line 56:
   echo "127.0.0.1 localhost" > /etc/hosts    echo "127.0.0.1 localhost" > /etc/hosts
  
- Nasty script to substitute /usr/bin/man which breaks dh_installdocs + Nasty script to substitute <code>/usr/bin/man</code> which breaks <code>dh_installdocs</code>
  
   #!/bin/bash    #!/bin/bash
Line 78:
Line 70:
   echo $p    echo $p
   /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p    /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p
-  
  
 Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl.  Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl.
  + 
  + [[Category:Software]]
  + [[Category:Development]]




nito: /* dh-make-perl at garage.maemo.org */
nito — Sun, 11 Apr 2010 22:34:49 GMT
dh-make-perl at garage.maemo.org

		
		
		
		
		
		
		← Older revision
		Revision as of 22:34, 11 April 2010
		
		Line 78:
Line 78:
   echo $p    echo $p
   /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p    /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p
  + 
  + 
  + Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl.




nito: /* dh-make-perl at garage.maemo.org */
nito — Sun, 11 Apr 2010 22:33:52 GMT
dh-make-perl at garage.maemo.org

		
		
		
		
		
		
		← Older revision
		Revision as of 22:33, 11 April 2010
		
		Line 50:
Line 50:
 Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among  Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among
  
- Some notes for people who want to port perl modules for ARM. I found out that I had to change the following: + Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):
  
   # Environment vars    # Environment vars




nito: /* Git repo at Gitorious */
nito — Sun, 11 Apr 2010 22:32:50 GMT
Git repo at Gitorious

		
		
		
		
		
		
		← Older revision
		Revision as of 22:32, 11 April 2010
		
		Line 45:
Line 45:
  
 [[Category:Software]]  [[Category:Software]]
  + 
  + === dh-make-perl at garage.maemo.org ===
  + 
  + Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among
  + 
  + Some notes for people who want to port perl modules for ARM. I found out that I had to change the following:
  + 
  +  # Environment vars
  +  SBOX_REDIRECT_IGNORE=/usr/bin/perl
  +  export  SBOX_REDIRECT_IGNORE
  +  unset PERL5LIB
  +  export PATH=/usr/bin/dh7:/usr/bin:$PATH
  +  export DISPLAY=:2
  +  export http_proxy=http://172.16.0.1:3128
  +  export https_proxy=http://172.16.0.1:3128
  +  export ftp_proxy=http://172.16.0.1:3128
  +  export GIT_SSL_NO_VERIFY=1
  +  echo "127.0.0.1 localhost" > /etc/hosts
  + 
  + Nasty script to substitute /usr/bin/man which breaks dh_installdocs
  + 
  +  #!/bin/bash
  +  n=$#
  +  echo "$# $1 $2 $n"
  +  while [ $n -ne 1 ]; do
  +   echo "$# $1 $2 $n"
  +   p=$1
  +   shift
  +   n=$#
  +  done
  +  p=$1
  +  echo $p
  +  /usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE  $p




jeremiah at 20:08, 6 March 2010
jeremiah — Sat, 06 Mar 2010 20:08:58 GMT


		
		
		
		
		
		
		← Older revision
		Revision as of 20:08, 6 March 2010
		
		Line 26:
Line 26:
 perl-base ''5.8.3-3osso10''  perl-base ''5.8.3-3osso10''
 |}  |}
  + 
  + The SDK repositories are here: 
  + 
  +  deb http://repository.maemo.org fremantle/sdk free non-free
  +  deb http://repository.maemo.org fremantle/tools free non-free
  + 
  + 
  
 If you wish to add perl modules what I recommend is to bring in the necessary tools, namely the perl package and the perl-modules package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built perl binaries for the N900. (There are later versions of perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on google.)  If you wish to add perl modules what I recommend is to bring in the necessary tools, namely the perl package and the perl-modules package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built perl binaries for the N900. (There are later versions of perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on google.)




jeremiah at 01:07, 4 January 2010
jeremiah — Mon, 04 Jan 2010 01:07:39 GMT


		
		
		
		
		
		
		← Older revision
		Revision as of 01:07, 4 January 2010
		
		Line 32:
Line 32:
  
 Now you should be ready to start bringing other modules in.  Now you should be ready to start bringing other modules in.
-  
-  
- == Perl modules available as debs ==  
  
 === Git repo at Gitorious ===  === Git repo at Gitorious ===
  
  + I have packaged one module so far, I hope to bring in many more perl modules. If you package something for the device, why not contribute your module to the maemo repos and/or ask me to pull it into the [http://gitorious.org/maemo-perl-packages/maemo-perl-packages/trees/master gitorious repo that] I have set up?
  
 [[Category:Software]]  [[Category:Software]]

← Older revision		Revision as of 11:02, 2 March 2011
Line 46:		Line 46:
	Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):		Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):

-	# Environment vars	+	<source lang="bash">
-	SBOX_REDIRECT_IGNORE=/usr/bin/perl	+	# Environment vars
-	export SBOX_REDIRECT_IGNORE	+	SBOX_REDIRECT_IGNORE=/usr/bin/perl
-	unset PERL5LIB	+	export SBOX_REDIRECT_IGNORE
-	export PATH=/usr/bin/dh7:/usr/bin:$PATH	+	unset PERL5LIB
-	export DISPLAY=:2	+	export PATH=/usr/bin/dh7:/usr/bin:$PATH
-	export http_proxy=http://172.16.0.1:3128	+	export DISPLAY=:2
-	export https_proxy=http://172.16.0.1:3128	+	export http_proxy=http://172.16.0.1:3128
-	export ftp_proxy=http://172.16.0.1:3128	+	export https_proxy=http://172.16.0.1:3128
-	export GIT_SSL_NO_VERIFY=1	+	export ftp_proxy=http://172.16.0.1:3128
-	echo "127.0.0.1 localhost" > /etc/hosts	+	export GIT_SSL_NO_VERIFY=1
		+	echo "127.0.0.1 localhost" > /etc/hosts
		+	</source>

	Nasty script to substitute <code>/usr/bin/man</code> which breaks <code>dh_installdocs</code>		Nasty script to substitute <code>/usr/bin/man</code> which breaks <code>dh_installdocs</code>

-	#!/bin/bash	+	<source lang="bash">
-	n=$#	+	#!/bin/bash
		+	n=$#
		+	echo "$# $1 $2 $n"
		+	while [ $n -ne 1 ]; do
	echo "$# $1 $2 $n"		echo "$# $1 $2 $n"
-	~~while [ $n -ne 1 ]; do~~
-	~~echo "$# $1 $2 $n"~~
-	~~p=$1~~
-	~~shift~~
-	~~n=$#~~
-	~~done~~
	p=$1		p=$1
-	echo $p	+	shift
-	/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p	+	n=$#
		+	done
		+	p=$1
		+	echo $p
		+	/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p
		+	</source>

-	Some packages ported include ssleay and some others which are needed ~~prerrequisites~~ for dh-make-perl.	+	Some packages ported include ssleay and some others which are needed prerequisites for <code>dh-make-perl</code>.

	[[Category:Software]]		[[Category:Software]]
	[[Category:Development]]		[[Category:Development]]

← Older revision		Revision as of 11:00, 2 March 2011
Line 10:		Line 10:

	{\| class="wikitable"		{\| class="wikitable"
		+	\|+ Installed Perl packages
		+	\|-
	! In the SDK !! On device		! In the SDK !! On device
	\|-		\|-

← Older revision		Revision as of 13:18, 14 July 2010
Line 1:		Line 1:
-	~~'''The~~ Perl environment on the Maemo ~~Platform'''~~	+	Because Maemo is based on Debian, and because perl is such a big part of the debian OS, Maemo contains a full-blown Perl platform. This page aims to document and describe this environment so developers can take advantage of it when programming on the Maemo platform.

-	Because Maemo is based on debian, and because perl is such a big part of the debian OS, Maemo contains a full-blown Perl platform. This page aims to document and describe this environment so developers can take advantage of it when programming on the Maemo platform.	+	== Fremantle ==

		+	The current version of perl shipped with the [[Nokia N900\|N900]] is 5.8.3.

-	~~'''Fremantle'''~~	+	One caveat of perl development on the N900 is that there is a fuller Perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental Perl modules are missing form the normal Debian version of Perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 MB.

-	~~The current version of~~ perl shipped with the ~~N900 is 5.8.3.~~	+	You will find it difficult to build Perl modules on the device if you do not add the necessary Perl tools, namely <code>perl</code> and <code>perl-modules</code>. Without these key tools, many of the modules used to build Perl modules won't exist on the device and you won't be able to add software written in Perl. Here is an example of what is shipped with both the SDK and device environments;

-
-	One caveat of perl development on the [[N900]] is that there is a fuller perl distribution in the SDK than on the device. This means not just that there are fewer modules on the device, it means that rather fundamental perl modules are missing form the normal debian version of perl on the device. This is done to save space; the device itself is embedded linux, the root files system is rather small, i.e. 228 Megs.
-
-	You will find it difficult to build perl modules on the device if you do not add the necessary perl tools, namely perl and perl-modules. Without these key tools, many of the modules used to build perl modules won't exist on the device and you won't be able to add software written in perl. Here is an example of what is shipped with both the SDK and device environments;
-
-	~~{\| class="wikitable"~~
-	~~\| \| '''In the SDK'''~~
-	~~\| style="background:LightBlue" \| '''On device'''~~
-	\|}
	{\| class="wikitable"		{\| class="wikitable"
-	\| \| liblocale-gettext-perl ''1.01-17osso2''<BR>	+	! In the SDK !! On device
-	libtimedate-perl ''1.1600-4osso''<BR>	+	\|-
-	perl ''5.8.3-3osso10''<BR>	+	\| liblocale-gettext-perl ''1.01-17osso2''<br/>
-	perl-base ''5.8.3-3osso10''<BR>	+	libtimedate-perl ''1.1600-4osso''<br/>
-	perl-modules ''5.8.3-3osso10''<BR>	+	perl ''5.8.3-3osso10''<br/>
-	~~\| style="background:LightBlue"~~ \| liblocale-gettext-perl ''1.01-17osso2''<BR>	+	perl-base ''5.8.3-3osso10''<br/>
		+	perl-modules ''5.8.3-3osso10''<br/>
		+	\| liblocale-gettext-perl ''1.01-17osso2''<br/>
	perl-base ''5.8.3-3osso10''		perl-base ''5.8.3-3osso10''
	\|}		\|}
Line 32:		Line 26:
	deb http://repository.maemo.org fremantle/tools free non-free		deb http://repository.maemo.org fremantle/tools free non-free

		+	If you wish to add Perl modules what I recommend is to bring in the necessary tools, namely the <code>perl</code> package and the <code>perl-modules</code> package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build Perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built Perl binaries for the N900. (There are later versions of Perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on Google.)

-		+	Once you have added the SDK repositories to your <code>/etc/apt/sources.list</code>, simply run:
-	If you wish to add perl modules what I recommend is to bring in the necessary tools, namely the perl package and the perl-modules package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built perl binaries for the N900. (There are later versions of perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on google.)	+	apt-get update
-		+	apt-get install perl perl-modules
-	Once you have added the SDK repositories to your /etc/apt/sources.list, simply run apt-get update ~~and~~ apt-get install perl perl-modules.	+

	Now you should be ready to start bringing other modules in.		Now you should be ready to start bringing other modules in.
Line 43:		Line 37:

	I have packaged one module so far, I hope to bring in many more perl modules. If you package something for the device, why not contribute your module to the maemo repos and/or ask me to pull it into the [http://gitorious.org/maemo-perl-packages/maemo-perl-packages/trees/master gitorious repo that] I have set up?		I have packaged one module so far, I hope to bring in many more perl modules. If you package something for the device, why not contribute your module to the maemo repos and/or ask me to pull it into the [http://gitorious.org/maemo-perl-packages/maemo-perl-packages/trees/master gitorious repo that] I have set up?
-
-	~~[[Category:Software]]~~

	=== dh-make-perl at garage.maemo.org ===		=== dh-make-perl at garage.maemo.org ===

-	Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among	+	Just ported <code>dh-make-perl</code> for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among

	Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):		Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):
Line 64:		Line 56:
	echo "127.0.0.1 localhost" > /etc/hosts		echo "127.0.0.1 localhost" > /etc/hosts

-	Nasty script to substitute /usr/bin/man which breaks dh_installdocs	+	Nasty script to substitute <code>/usr/bin/man</code> which breaks <code>dh_installdocs</code>

	#!/bin/bash		#!/bin/bash
Line 78:		Line 70:
	echo $p		echo $p
	/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p		/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p
-

	Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl.		Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl.
		+
		+	[[Category:Software]]
		+	[[Category:Development]]

← Older revision		Revision as of 22:34, 11 April 2010
Line 78:		Line 78:
	echo $p		echo $p
	/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p		/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p
		+
		+
		+	Some packages ported include ssleay and some others which are needed prerrequisites for dh-make-perl.

← Older revision		Revision as of 22:33, 11 April 2010
Line 50:		Line 50:
	Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among		Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among

-	Some notes for people who want to port perl modules for ARM. I found out that I had to change the following:	+	Some notes for people who want to port perl modules for ARM. I found out that I had to change the following (change your proxy settings as appropiate):

	# Environment vars		# Environment vars

← Older revision		Revision as of 22:32, 11 April 2010
Line 45:		Line 45:

	[[Category:Software]]		[[Category:Software]]
		+
		+	=== dh-make-perl at garage.maemo.org ===
		+
		+	Just ported dh-make-perl for Maemo fremantle. The packages ported are available at [http://dh-make-perl.garage.maemo.org]. It includes among
		+
		+	Some notes for people who want to port perl modules for ARM. I found out that I had to change the following:
		+
		+	# Environment vars
		+	SBOX_REDIRECT_IGNORE=/usr/bin/perl
		+	export SBOX_REDIRECT_IGNORE
		+	unset PERL5LIB
		+	export PATH=/usr/bin/dh7:/usr/bin:$PATH
		+	export DISPLAY=:2
		+	export http_proxy=http://172.16.0.1:3128
		+	export https_proxy=http://172.16.0.1:3128
		+	export ftp_proxy=http://172.16.0.1:3128
		+	export GIT_SSL_NO_VERIFY=1
		+	echo "127.0.0.1 localhost" > /etc/hosts
		+
		+	Nasty script to substitute /usr/bin/man which breaks dh_installdocs
		+
		+	#!/bin/bash
		+	n=$#
		+	echo "$# $1 $2 $n"
		+	while [ $n -ne 1 ]; do
		+	echo "$# $1 $2 $n"
		+	p=$1
		+	shift
		+	n=$#
		+	done
		+	p=$1
		+	echo $p
		+	/usr/lib/man-db/manconv -f UTF-8:ISO-8859-1 -t UTF-8//IGNORE $p

← Older revision		Revision as of 20:08, 6 March 2010
Line 26:		Line 26:
	perl-base ''5.8.3-3osso10''		perl-base ''5.8.3-3osso10''
	\|}		\|}
		+
		+	The SDK repositories are here:
		+
		+	deb http://repository.maemo.org fremantle/sdk free non-free
		+	deb http://repository.maemo.org fremantle/tools free non-free
		+
		+

	If you wish to add perl modules what I recommend is to bring in the necessary tools, namely the perl package and the perl-modules package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built perl binaries for the N900. (There are later versions of perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on google.)		If you wish to add perl modules what I recommend is to bring in the necessary tools, namely the perl package and the perl-modules package. You can do that by adding the repositories that supply modules to the SDK. Of course you can build perl yourself, but it is already built for the device's architecture and it is in a known good state, so it is much easier to just take the already built perl binaries for the N900. (There are later versions of perl built and packaged for the device, I'll eventually provide links to those, until then, you'll have to rely on google.)

← Older revision		Revision as of 01:07, 4 January 2010
Line 32:		Line 32:

	Now you should be ready to start bringing other modules in.		Now you should be ready to start bringing other modules in.
-
-
-	~~== Perl modules available as debs ==~~

	=== Git repo at Gitorious ===		=== Git repo at Gitorious ===

		+	I have packaged one module so far, I hope to bring in many more perl modules. If you package something for the device, why not contribute your module to the maemo repos and/or ask me to pull it into the [http://gitorious.org/maemo-perl-packages/maemo-perl-packages/trees/master gitorious repo that] I have set up?

	[[Category:Software]]		[[Category:Software]]