MADDE/QtCreator integration for windows - Revision history

karipulli: /* Deploy the key from QtCreator */

karipulli — Tue, 20 Jul 2010 01:44:42 GMT

Deploy the key from QtCreator

← Older revision		Revision as of 01:44, 20 July 2010
Line 201:		Line 201:
	You can configure these settings in the Maemo Device Configurations		You can configure these settings in the Maemo Device Configurations

-	Tools -> Options~~...~~ -> ~~Qt4~~ -> Maemo Device Configurations	+	Tools -> Options -> Projects -> Maemo Device Configurations
		+
		+	'''Note: ''' In older versions of Qt Creator the Maemo Device Configuration is under Qt4 tab.

	'''Note: ''' For these steps your device has to be connected to the PC and the password has to be valid. By clicking "Test" button, you can check if that is the case.		'''Note: ''' For these steps your device has to be connected to the PC and the password has to be valid. By clicking "Test" button, you can check if that is the case.


-	Now you click on "Deploy..." and select the public key you have created before. If you have specified a file-name you will find it in:	+	Now you click on "Deploy..." and select the public key you have created before. If you have specified a file name you will find it in:

	C:\MADDE\<version>\home\<username>\<keyname>.pub		C:\MADDE\<version>\home\<username>\<keyname>.pub
Line 213:		Line 215:
	[[Image:09_qtcreator_deploy_key.jpg‎\|400px]]		[[Image:09_qtcreator_deploy_key.jpg‎\|400px]]

-	Once the key is deployed correctly you can set up your device-configuration to use the key to connect to the device. Change now the "Authentication type" from "Password" to "Key". Now it uses a standard location, for the private key, which should not exist. Change the location, with the one of your real key. Following this tutorial you will find it in:	+	Once the key is deployed correctly you can set up your device configuration to use the key to connect to the device. Change now the "Authentication type" from "Password" to "Key". Now it uses a standard location, for the private key, which should not exist. Change the location, with the one of your real key. Following this tutorial you will find it in:

	C:\MADDE\<version>\home\<username>\<keyname>		C:\MADDE\<version>\home\<username>\<keyname>

karipulli: /* Use Maemo5 build settings */

karipulli — Tue, 20 Jul 2010 00:40:17 GMT

Use Maemo5 build settings

← Older revision		Revision as of 00:40, 20 July 2010
Line 223:		Line 223:
	== Use Maemo5 build settings ==		== Use Maemo5 build settings ==

-	Now all the configuration is done and you can select Maemo as a build configuration. If you have a project, which you want to compile for Maemo, then click on the project button in the menu of the left side. Now you should ~~seen~~ a screen, like in the screen shot below. If you have the Qt libraries installed, then you will have the "Desktop" as the default option selected.	+	Now all the configuration is done and you can select Maemo as a build configuration. If you have a project, which you want to compile for Maemo, then click on the project button in the menu of the left side. Now you should see a screen, like in the screen shot below. If you have the Qt libraries installed, then you will have the "Desktop" as the default option selected.

	[[Image:04_qtcreator_init.jpg]]		[[Image:04_qtcreator_init.jpg]]
Line 256:		Line 256:


-	~~Now you can set which~~ build configuration you want to use (located in the bottom left corner):	+	Select the build configuration you want to use (located in the bottom left corner):

	[[Image:08_qtcreator_final.jpg]]		[[Image:08_qtcreator_final.jpg]]


-	~~Now you can click on~~ the run button, ~~and~~ your application will be automatically compiled for the Maemo device, ~~delpoyed~~, and started.	+	By clicking the run button, your application will be automatically compiled for the Maemo device, deployed, and started.

	[[Category:Development]]		[[Category:Development]]

karipulli: /* Configure the client for USB */

karipulli — Tue, 20 Jul 2010 00:35:19 GMT

Configure the client for USB

← Older revision		Revision as of 00:35, 20 July 2010
Line 100:		Line 100:


-	2~~. Then choose "Load g_ether"~~	+	2. If Module in use is not "g_ether" choose "Load g_ether". Then click "Close".
-		+
-	~~:[[Image:02_client_props.png\|300px]]~~	+
-		+
-		+
-		+
-		+
-	3. If Module in use is "g_ether" click "~~close~~"	+

	:[[Image:03_client_ether.png\|300px]]		:[[Image:03_client_ether.png\|300px]]
Line 114:		Line 107:


-	4. Now you can set up the USB settings. Please click on "~~edit~~", which shows you the USB-configuration settings. Then click on "~~configure~~". After that your client is set up for the connection with your PC.	+	3. Now you can set up the USB settings. Please click on "Edit", which shows you the USB-configuration settings. Then click on "Configure". After that your client is set up for the connection with your PC.

	:[[Image:04_a_client_edit.png\|300px]] [[Image:04_b_client_ready.png\|300px]]		:[[Image:04_a_client_edit.png\|300px]] [[Image:04_b_client_ready.png\|300px]]
Line 121:		Line 114:


-	'''TIP:''' There might be problems if you have a GPRS connection running on the device. Please shut that down while testing	+	'''TIP:''' There might be problems if you have a GPRS connection running on the device. Please shut that down while testing.
-		+
-		+
-		+
-		+

	=== Windows configuration ===		=== Windows configuration ===

craftyguy: /* QtCreator Configuration */

craftyguy — Tue, 15 Jun 2010 05:44:54 GMT

QtCreator Configuration

← Older revision		Revision as of 05:44, 15 June 2010
Line 165:		Line 165:

	Add the password and all the data you see in the screenshot below. Check the box, that you want to use the password as the authentication method. After that click on "test" and see if the connection can be set up.		Add the password and all the data you see in the screenshot below. Check the box, that you want to use the password as the authentication method. After that click on "test" and see if the connection can be set up.
		+
		+	*Note: It seems that with the newer QT Creator (1.3.84), the location of the settings in the image below have moved to Tools->Options->Projects->Maemo Device Configurations

	[[Image:05_creator_add_device.jpg\|300px]]		[[Image:05_creator_add_device.jpg\|300px]]
Line 184:		Line 186:
	# In the Private Key file entry at the same window, browse for the 2nd file generated at step 3. "id_rsa"		# In the Private Key file entry at the same window, browse for the 2nd file generated at step 3. "id_rsa"
	# Click "Test" in Qt to check it works properly		# Click "Test" in Qt to check it works properly
-		+	[[Image:Example.jpg]]
-		+

	=== Deploy SSH key ===		=== Deploy SSH key ===

alexbravo: /* Use Maemo5 build settings */

alexbravo — Thu, 10 Jun 2010 20:18:42 GMT

Use Maemo5 build settings

← Older revision		Revision as of 20:18, 10 June 2010
Line 266:		Line 266:


-	~~Finally~~ you can ~~now~~ set ~~in the down left corner,~~ which build configuration you want to use:	+	Now you can set which build configuration you want to use (located in the bottom left corner):

	[[Image:08_qtcreator_final.jpg]]		[[Image:08_qtcreator_final.jpg]]

alexbravo: /* Windows configuration */

alexbravo — Thu, 10 Jun 2010 18:53:08 GMT

Windows configuration

← Older revision		Revision as of 18:53, 10 June 2010
Line 143:		Line 143:


-	After clicking on "apply", ~~you should see~~ in your network configuration, that the connection is established.	+	After clicking on "apply", in your network configuration you should see that the connection is established.




-	'''Tip:''' In some cases ~~there~~ might occur ~~problems~~, if you have an active VPN connection.	+	'''Tip:''' In some cases problems might occur, if you have an active VPN connection.

	'''Important:''' If you have User Account Control enabled on Windows Vista/7, you MUST run this tool with the "Run as Administrator" option.		'''Important:''' If you have User Account Control enabled on Windows Vista/7, you MUST run this tool with the "Run as Administrator" option.

danielwilms: /* Install the client */

danielwilms — Mon, 10 May 2010 08:08:06 GMT

Install the client

← Older revision		Revision as of 08:08, 10 May 2010
Line 73:		Line 73:

	==== Install the client ====		==== Install the client ====
-
-
-
-
-	<div style="border: 1px solid red; background-color: #faa; padding: 20px;"><div style="text-align:center;">Please keep in mind that this is a '''TECHNOLOGY PREVIEW'''. The following steps should only be taken if you want to test software in an early stage of development. To test the preview, you have to activate the [[extras-devel]] repository on device.</div></div>
-

	1. Open the Application Manager.		1. Open the Application Manager.

-	2. ~~Add~~ the [[extras~~-devel~~]] repository.	+	2. Enable the [[extras]] repository.
-		+
-	~~:[[Image:App_manager_extras_devel_screenshot.png\|400px]]~~	+

	3. Go to: Download -> Development -> mad-developer		3. Go to: Download -> Development -> mad-developer
Line 92:		Line 84:

	The following instructions show how to connect your device with your PC by using the USB connection.		The following instructions show how to connect your device with your PC by using the USB connection.
-
-
-
-

	==== Configure the client for USB ====		==== Configure the client for USB ====

amigadave: /* General advice */ included in {{MADDE}}

amigadave — Wed, 21 Apr 2010 12:44:19 GMT

General advice: included in {{MADDE}}

← Older revision		Revision as of 12:44, 21 April 2010
Line 8:		Line 8:

	* [[MADDE]] installed on your Windows machine		* [[MADDE]] installed on your Windows machine
-
-
-	~~== General advice ==~~
-	As this is a technology preview, remember that bugs can occur. If some of the components don't work as expected, please add your question to the [http://talk.maemo.org/showthread.php?t=38075 talk-thread] and follow up the discussion.
-

amigadave: wikify a bit, still ugly

amigadave — Wed, 21 Apr 2010 12:26:40 GMT

wikify a bit, still ugly

← Older revision		Revision as of 12:26, 21 April 2010
Line 1:		Line 1:
		+	{{MADDE}}
		+
	= QtCreator and MADDE on Windows =		= QtCreator and MADDE on Windows =

Line 5:		Line 7:
	Requires:		Requires:

-	* [[~~MADDE \|~~ MADDE]] installed on your Windows machine	+	* [[MADDE]] installed on your Windows machine


Line 80:		Line 82:


-	<div style="border: 1px solid red; background-color: #faa; padding: 20px;"><div style="text-align:center;">Please keep in mind that this is a '''TECHNOLOGY PREVIEW'''. The following steps should only be taken if you want to test software in an early stage of development. To test the preview, you have to activate the [[~~Extras-devel \|~~ extras-devel]] repository on device.</div></div>	+	<div style="border: 1px solid red; background-color: #faa; padding: 20px;"><div style="text-align:center;">Please keep in mind that this is a '''TECHNOLOGY PREVIEW'''. The following steps should only be taken if you want to test software in an early stage of development. To test the preview, you have to activate the [[extras-devel]] repository on device.</div></div>


	1. Open the Application Manager.		1. Open the Application Manager.

-	2. Add the [[~~Extras-devel \|~~ extras-devel]] repository.	+	2. Add the [[extras-devel]] repository.

	:[[Image:App_manager_extras_devel_screenshot.png\|400px]]		:[[Image:App_manager_extras_devel_screenshot.png\|400px]]
Line 188:		Line 190:
	'''Tip''' You can use your ssh key for the connection. Click on "Deploy Key ..." and select your key. If the other settings are correct the key will be automatically deployed on your device, so that you don't have to worry about the passwords anymore. To Deploy the SSH key, you first need to obtain it. Here are the steps :		'''Tip''' You can use your ssh key for the connection. Click on "Deploy Key ..." and select your key. If the other settings are correct the key will be automatically deployed on your device, so that you don't have to worry about the passwords anymore. To Deploy the SSH key, you first need to obtain it. Here are the steps :

-	* Open up MADDE terminal in Windows. (In Start > Programs > MADDE > MADDE terminal)	+	# Open up MADDE terminal in Windows. (In Start > Programs > MADDE > MADDE terminal)
-	* type "cd /"	+	# type "cd /"
-	* Type "ssh-keygen -t rsa"	+	# Type "ssh-keygen -t rsa"
-	* Pick a name for your key (I just called mine rsa1)	+	# Pick a name for your key (I just called mine rsa1)
-	* Pick a password if you want one (I left it blank so no password)	+	# Pick a password if you want one (I left it blank so no password)
-	* In Qt click "deploy key" and browse to where the key is (MADDE\MADDE_VERSION\home\<username>\.ssh)	+	# In Qt click "deploy key" and browse to where the key is (MADDE\MADDE_VERSION\home\<username>\.ssh)
-	* Select your_key_name.pub file	+	# Select your_key_name.pub file
-	* Qt should say key sucessfully deployed	+	# Qt should say key sucessfully deployed
-	* Change "Authentication Type" option in Qt to "key"	+	# Change "Authentication Type" option in Qt to "key"
-	* In the Private Key file entry at the same window, browse for the 2nd file generated at step 3. "id_rsa"	+	# In the Private Key file entry at the same window, browse for the 2nd file generated at step 3. "id_rsa"
-	* Click "Test" in Qt to check it works properly	+	# Click "Test" in Qt to check it works properly

venemo: /* Windows configuration */

venemo — Wed, 24 Mar 2010 16:37:25 GMT

Windows configuration

← Older revision		Revision as of 16:37, 24 March 2010
Line 165:		Line 165:
	'''Tip:''' In some cases there might occur problems, if you have an active VPN connection.		'''Tip:''' In some cases there might occur problems, if you have an active VPN connection.

-		+	'''Important:''' If you have User Account Control enabled on Windows Vista/7, you MUST run this tool with the "Run as Administrator" option.
-		+
-		+
-		+
-		+

	=== QtCreator Configuration ===		=== QtCreator Configuration ===