Citrix Receiver - Revision history

subcore: switching back to Maemo; and the title should probably stay b/c it's for n900 only

subcore — Mon, 23 Aug 2010 18:35:09 GMT

switching back to Maemo; and the title should probably stay b/c it's for n900 only

← Older revision		Revision as of 18:35, 23 August 2010
Line 1:		Line 1:
		+	= Citrix Receiver 11.1 on the N900 =
		+
	== What you need ==		== What you need ==

Line 52:		Line 54:
	</source>		</source>

-	Then create a "new Xref" the same way, type in ".ica" as protocol and select "Icaclient" as handler. Finally, select "save" from the menu to write your changes. There is probably a more scriptable solution, feel free to add it if you know!	+	Then create a "new Xref" the same way, type in <code>.ica</code> as protocol and select "Icaclient" as handler. Finally, select "save" from the menu to write your changes. There is probably a more scriptable solution, feel free to add it if you know!


Line 60:		Line 62:


-	To start the connection manager, you can either do so directly via Xterm ("/opt/icaclient/wfcmgr"), or create a Desktop entry.	+	To start the connection manager, you can either do so directly via Xterm (<code>/opt/icaclient/wfcmgr</code>), or create a Desktop entry.
		+
		+	To switch back to your Maemo session, you have to press the power button and select "phone" from the menu.

	I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)		I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)
Line 67:		Line 71:

	* No Sound.		* No Sound.
-	* There's no way to switch back to Maemo without disconnecting.	+	* Citrix Receiver will always report an English Input Layout, so you'll have to use Windows' Languagebar to change the Layout for non-english devices.
-	* Citrix Receiver will always report an English Input Layout, so you have to use Windows' Languagebar to change ~~your Input~~ Layout.	+
	* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.		* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.

	[[Category:Software]]		[[Category:Software]]
	[[Category:Power users]]		[[Category:Power users]]

amigadave: wikify slightly

amigadave — Mon, 23 Aug 2010 08:44:12 GMT

wikify slightly

← Older revision		Revision as of 08:44, 23 August 2010
Line 1:		Line 1:
-	~~= Citrix Receiver 11.1 on the N900 =~~
-
	== What you need ==		== What you need ==
		+
	# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)		# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)
	# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page. Also make sure you have the default Repositories "Nokia Applications" and "Nokia System Software Updates" set up and enabled.		# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page. Also make sure you have the default Repositories "Nokia Applications" and "Nokia System Software Updates" set up and enabled.
	# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your [[Rootfs]]. Be sure to get the armel packages!		# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your [[Rootfs]]. Be sure to get the armel packages!
-

	== How to install ==		== How to install ==
-	Put the file you downloaded from the Citrix page and those from Debian somewhere on the Device, e.g. MyDocs (the 32GB on-device storage area).	+
-	Proceed as follows inside an XTerm (substitute the correct filenames if your versions or paths differ):	+	Put the file you downloaded from the Citrix page and those from Debian somewhere on the Device, e.g. MyDocs (the 32GB on-device storage area). Proceed as follows inside an [[Terminal\|XTerm]] (substitute the correct filenames if your versions or paths differ):

	<source lang="bash">		<source lang="bash">
Line 32:		Line 30:
	</source>		</source>

-	When you're asked for a directory, type in	+	When you're asked for a directory, type in:
	<source lang="bash">		<source lang="bash">
	/opt/icaclient		/opt/icaclient
	</source>		</source>

-	Confirm the next question by entering "y". This way, the installation will reside on the larger /opt partition and not fill up your rootfs.	+	Confirm the next question by entering "y". This way, the installation will reside on the larger <code>/opt</code> partition and not fill up your rootfs.

	Say "n" to the other questions, they won't work anyways, and no reason in letting the script change some non-existent (because non-Maemo) places.		Say "n" to the other questions, they won't work anyways, and no reason in letting the script change some non-existent (because non-Maemo) places.
Line 48:		Line 46:
	</source>		</source>

-		+	Now start <code>dbus-switchboard</code> from the launch menu, tap on the title bar and select "new handler" from the menu, name it "Icaclient" and enter this command:
-	Now start dbus-switchboard from the launch menu, tap on the title bar and select "new handler" from the menu, name it "Icaclient" and enter this command:	+

	<source lang="bash">		<source lang="bash">
Line 64:		Line 61:

	To start the connection manager, you can either do so directly via Xterm ("/opt/icaclient/wfcmgr"), or create a Desktop entry.		To start the connection manager, you can either do so directly via Xterm ("/opt/icaclient/wfcmgr"), or create a Desktop entry.
-

	I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)		I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)

		+	== Known Issues ==

-	~~== Known Issues ==~~
	* No Sound.		* No Sound.
	* There's no way to switch back to Maemo without disconnecting.		* There's no way to switch back to Maemo without disconnecting.
Line 75:		Line 71:
	* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.		* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.

-		+	[[Category:Software]]
	[[Category:Power users]]		[[Category:Power users]]

subcore: small changes in wording

subcore — Sat, 21 Aug 2010 09:36:20 GMT

small changes in wording

← Older revision		Revision as of 09:36, 21 August 2010
Line 4:		Line 4:
	# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)		# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)
	# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page. Also make sure you have the default Repositories "Nokia Applications" and "Nokia System Software Updates" set up and enabled.		# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page. Also make sure you have the default Repositories "Nokia Applications" and "Nokia System Software Updates" set up and enabled.
-	# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your ~~rootfs~~. Be sure to get the armel packages!	+	# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your [[Rootfs]]. Be sure to get the armel packages!
		+

	== How to install ==		== How to install ==
	Put the file you downloaded from the Citrix page and those from Debian somewhere on the Device, e.g. MyDocs (the 32GB on-device storage area).		Put the file you downloaded from the Citrix page and those from Debian somewhere on the Device, e.g. MyDocs (the 32GB on-device storage area).
-	Proceed as follows inside an XTerm (substitute the correct filenames if your versions differ):	+	Proceed as follows inside an XTerm (substitute the correct filenames if your versions or paths differ):

	<source lang="bash">		<source lang="bash">
		+	# become root
	sudo gainroot		sudo gainroot

		+	# get prerequisites
	apt-get install dbus-switchboard libxinerama1 libxaw7 libxmu6 libxpm4		apt-get install dbus-switchboard libxinerama1 libxaw7 libxmu6 libxpm4
		+	# add mime type for .ica files, associate with dbus-switchboard
	echo "application/x-ica=hildon-dbus-switchboard.desktop" >> /usr/share/applications/defaults.list		echo "application/x-ica=hildon-dbus-switchboard.desktop" >> /usr/share/applications/defaults.list

Line 20:		Line 24:
	dpkg --force-depends -i /home/user/MyDocs/libmotif3_2.2.3-4_armel.deb		dpkg --force-depends -i /home/user/MyDocs/libmotif3_2.2.3-4_armel.deb

-		+	# create source directory in /opt, extract icaclient and run setup script
	cd /opt		cd /opt
	mkdir icaclient.src		mkdir icaclient.src
Line 33:		Line 37:
	</source>		</source>

-	Confirm the next question by entering "y". This way, the installation will reside on the larger /opt partition and not ~~take~~ up ~~precious space on~~ your rootfs.	+	Confirm the next question by entering "y". This way, the installation will reside on the larger /opt partition and not fill up your rootfs.

	Say "n" to the other questions, they won't work anyways, and no reason in letting the script change some non-existent (because non-Maemo) places.		Say "n" to the other questions, they won't work anyways, and no reason in letting the script change some non-existent (because non-Maemo) places.
Line 51:		Line 55:
	</source>		</source>

-	Then create a "new Xref" the same way, type in ".ica" as protocol and select "Icaclient" as handler. Finally, select "save" from the menu to write your changes.	+	Then create a "new Xref" the same way, type in ".ica" as protocol and select "Icaclient" as handler. Finally, select "save" from the menu to write your changes. There is probably a more scriptable solution, feel free to add it if you know!


Line 63:		Line 67:

	I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)		I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)
		+

	== Known Issues ==		== Known Issues ==

subcore: /* How to install */

subcore — Sat, 21 Aug 2010 02:26:21 GMT

How to install

← Older revision		Revision as of 02:26, 21 August 2010
Line 45:		Line 45:


-	Now start dbus-switchboard from the launch menu, tap on the ~~menu~~ and select "new handler", name it "Icaclient" and enter this as command:	+	Now start dbus-switchboard from the launch menu, tap on the title bar and select "new handler" from the menu, name it "Icaclient" and enter this command:

	<source lang="bash">		<source lang="bash">
Line 51:		Line 51:
	</source>		</source>

-	Then create a new ~~xref~~, type in ".ica" as protocol and select "Icaclient" as handler. Finally, select "save" from the menu to write your changes.	+	Then create a "new Xref" the same way, type in ".ica" as protocol and select "Icaclient" as handler. Finally, select "save" from the menu to write your changes.

subcore: clarification

subcore — Sat, 21 Aug 2010 02:23:52 GMT

clarification

← Older revision		Revision as of 02:23, 21 August 2010
Line 45:		Line 45:


-	Now start dbus-switchboard, tap on the menu and select "new handler", name it "Icaclient" and enter this as command:	+	Now start dbus-switchboard from the launch menu, tap on the menu and select "new handler", name it "Icaclient" and enter this as command:

	<source lang="bash">		<source lang="bash">

subcore: /* What you need */

subcore — Sat, 21 Aug 2010 02:19:06 GMT

What you need

← Older revision		Revision as of 02:19, 21 August 2010
Line 3:		Line 3:
	== What you need ==		== What you need ==
	# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)		# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)
-	# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page.	+	# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page. Also make sure you have the default Repositories "Nokia Applications" and "Nokia System Software Updates" set up and enabled.
	# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your rootfs. Be sure to get the armel packages!		# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your rootfs. Be sure to get the armel packages!

subcore at 02:12, 21 August 2010

subcore — Sat, 21 Aug 2010 02:12:58 GMT

← Older revision		Revision as of 02:12, 21 August 2010
Line 17:		Line 17:

	# these 2 are only needed for Connection Manager		# these 2 are only needed for Connection Manager
-	dpkg --force-~~all~~ -i /home/user/MyDocs/libxp6_1.0.0.xsf1-2_armel.deb	+	dpkg --force-depends -i /home/user/MyDocs/libxp6_1.0.0.xsf1-2_armel.deb
-	dpkg --force-~~all~~ -i /home/user/MyDocs/libmotif3_2.2.3-4_armel.deb	+	dpkg --force-depends -i /home/user/MyDocs/libmotif3_2.2.3-4_armel.deb


Line 65:		Line 65:

	== Known Issues ==		== Known Issues ==
-	* Sound ~~is not working~~.	+	* No Sound.
	* There's no way to switch back to Maemo without disconnecting.		* There's no way to switch back to Maemo without disconnecting.
	* Citrix Receiver will always report an English Input Layout, so you have to use Windows' Languagebar to change your Input Layout.		* Citrix Receiver will always report an English Input Layout, so you have to use Windows' Languagebar to change your Input Layout.
	* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.		* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.
		+
		+
		+	[[Category:Power users]]

subcore: /* Known Issues */

subcore — Fri, 20 Aug 2010 21:16:04 GMT

Known Issues

← Older revision		Revision as of 21:16, 20 August 2010
Line 68:		Line 68:
	* There's no way to switch back to Maemo without disconnecting.		* There's no way to switch back to Maemo without disconnecting.
	* Citrix Receiver will always report an English Input Layout, so you have to use Windows' Languagebar to change your Input Layout.		* Citrix Receiver will always report an English Input Layout, so you have to use Windows' Languagebar to change your Input Layout.
-	* Fn+Sym does not work, you have to rely on ~~the~~ on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.	+	* Fn+Sym does not work, you have to rely on Windows' on-screen keyboard for special characters other than the ones directly accessible by Fn+Key.

subcore: /* What you need */

subcore — Fri, 20 Aug 2010 21:11:22 GMT

What you need

← Older revision		Revision as of 21:11, 20 August 2010
Line 4:		Line 4:
	# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)		# Citrix Receiver 11.1 for Linux ARM Version, .tar.gz (try [http://www.citrix.com/English/ss/downloads/details.asp?downloadId=3323&productId=186&c1=sot2755 this direct link], but it's easily found anyhow.)
	# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page.		# [[Extras-devel]] enabled - this is only needed for [http://maemo.org/packages/view/dbus-switchboard/ dbus-switchboard]. The usual disclaimers apply, please read the wiki page.
-	# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your rootfs. Be sure to get the armel packages!	+	# [http://packages.debian.org/squeeze/libmotif3 libmotif3] and [http://packages.debian.org/squeeze/libxp6 libxp6] from the Debian Squeeze ARM repository - this is only required for the Connection Manager, if you don't plan on using it, you can skip these. The client works just as well without them and you'll save some precious space (around 1,2 MB) on your rootfs. Be sure to get the armel packages!
-		+

	== How to install ==		== How to install ==

subcore: typo

subcore — Fri, 20 Aug 2010 21:04:13 GMT

typo

← Older revision		Revision as of 21:04, 20 August 2010
Line 29:		Line 29:
	</source>		</source>

-	~~when~~ you're asked for a directory, type in	+	When you're asked for a directory, type in
	<source lang="bash">		<source lang="bash">
	/opt/icaclient		/opt/icaclient
Line 64:		Line 64:

	I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)		I have the best experience on XenApp Servers (under Windows Server 2008) in a Fullscreen session, with the on-screen keyboard set to start automatically. This way you have a full 800x480 desktop, and you can use the "properties" key as a sort of right-click substitute. It's a bit clunky but better than nothing :)
-

	== Known Issues ==		== Known Issues ==